Pillars Pillars Academy

The Pillars Cellar and Bar Guide

Everything your team needs to pour a perfect pint, from the day the beer arrives to the moment it reaches your customer.

Contents
  1. Start here
  2. The standards
  3. Safety
  4. Routines
  5. Deliveries
  6. The cellar
  7. Kegs and coolers
  8. Line cleaning
  9. Glassware
  10. The pour
  11. Fault finder
  12. Cellar words

Start here

A clean, pale lager has nowhere to hide. A warm cellar, a line that missed its clean or a greasy glass shows up in the first sip, and the customer blames the beer. The good news is that nearly every problem comes down to a few habits, and none of them are hard.

This guide covers keg beer, and cans and bottles. Start with the standards and the safety notes, then make the routines part of every shift. The how-tos and the fault finder are there when you need them, and the trade words are explained at the end.

Something not right with a Pillars beer? Call us on 020 8521 5552 or email sales@pillarsbrewery.com.

The standards

The standard
Cellar temperature 11 to 13°C. Read it and log it every day. If your kegs live in a cold room and pour without a separate cooler, keep the room at the temperature your installer set the system up for, and read "11 to 13°C" in this guide as that figure.
Rest before sale Aim for 2 full days at cellar temperature, and order far enough ahead to manage it. If you are ever caught short, 24 hours is the absolute minimum.
Life left on arrival 20 days or more on every keg
Selling time once connected Within 5 days
Line cleaning Every line, at least every 7 days. Only go longer if your installer has fitted a system built for it and given you the interval in writing.
Cleaner contact time 30 minutes, with fresh solution drawn through every 10 minutes, unless the cleaner's label says otherwise. Never over 1 hour.
Rinse after cleaning Clear the cleaner, run 10 more litres of water through every line, then test the water from each tap against a strip dipped in fresh tap water. Keep flushing until they match.
Keg couplers Rinsed with water every 7 days
Fresh air Outside door or cellar flaps open for 10 minutes a day, never left unattended
Head on a pint 10 mm, unless the brand owner specifies otherwise
Glasses Clean, cool, dry, free of grease and undamaged
Cellar cooler Serviced at least once a year

The four checks

Every beer, every day, gets four checks: clarity, aroma, taste and temperature. In the trade this is CATT. Look at it, smell it, taste it and check it is pouring at the temperature the brewer recommends, which your cooler should be set to deliver. Do it again whenever you connect a new keg and after every line clean. If a beer fails any of the four, take it off sale and turn to the fault finder. Some beers are meant to be hazy because they are unfiltered, so check with the brewer before pulling one for haze alone.

Safety

Dispense gas

Dispense gas can kill. Carbon dioxide is poisonous at high levels, and carbon dioxide, nitrogen and mixed gas can all push the oxygen out of the air. Carbon dioxide is heavier than air and collects low down, so a cellar can fill without any warning. Signs include headache, fast breathing, dizziness and confusion.

If a gas alarm sounds or you suspect a leak, get out of the cellar at once and keep everyone else out. Ventilate from outside if it is safe to, and call your gas supplier. Do not go back in until the alarm has cleared and your gas supplier or the emergency services say it is safe. If someone has collapsed in the cellar, do not go in after them: call 999.

People

Paperwork

Cylinders

Leave alone

Whoever installs your dispense system should fit the gas system to the industry code of practice and the dispense equipment to each brand owner's specification. They should show you how it works, what maintenance it needs and what the law expects of you, complete the code of practice paperwork, and leave you the pressure system documents: a completed Pressure System Card, the written scheme of examination (which says when the system is next due to be examined) and a copy of the industry's guidance on running beer gas systems safely.

Chemicals

Every cleaning chemical you use comes under COSHH: line cleaner, glasswasher detergent, rinse aid and the cleaners used in the cellar and bar.

Lifting

Kegs are heavy: a full 30 litre keg weighs around 40 kg. Use proper manual handling technique, roll kegs on their bottom rim or use a trolley rather than lifting them, and make sure the delivery route is safe before every delivery.

Routines

Customers judge your beer before they taste it: by the bar top, the taps and the glass. These lists keep all of that right and keep you on the right side of food hygiene law, so hold the standard every shift. Use them as your rota.

Opening

Where Job
Cellar Turn the dispense gas on at the secondary valves. Do the same at the start of every session, and turn it off at the end of each one.
Glasswasher Put the machine back together and turn it on. No glasses go in until the tank has filled and heated and one cycle has run empty.
Bar Run the four checks on every beer on sale.

At close

Where Job
Cellar Turn the dispense gas off.
Glasswasher Drain it, then switch off. Work from the inside out: filters out and cleaned, spray arms turned by hand to check they spin freely, top and bottom nozzles cleared, inside walls and door seals wiped. Refill the detergent and rinse aid. Prop the door open overnight.
Brush washer or hand-wash sink Clean and sanitise. For a brush washer, follow the maker's instructions.

Every day

Where Job
Cellar Log the temperature. Open the outside door or cellar flaps for 10 minutes of fresh air, which helps stop gas building up and keeps mould down; never leave open flaps unattended, and put barriers round them. Keep any fixed vents clear. Airing the cellar is not protection against a gas leak: for that, see Safety. Mop up spills with water as soon as they happen, clean the sinks and take rubbish straight out, never onto the floor.
Coolers Check the ice bank on remote coolers. Remote coolers stay on all day and night.
Glasswasher Check detergent and rinse aid are topped up and are actually being used. Keep an eye on how much detergent you get through.
Bar Taps first: take off removable spouts, sparklers and creamer plates to clean, clean the fixed spouts in place, and wash the drip trays under the taps. Then the counter: bar top, runners and the other drip trays. Then the back bar, the fridge door glass and the glasswasher. Empty and clean the waste and bottle bins, and do the floor last. As you restock, wipe each bottle and can and put older stock to the front.

Every week

Where Job
Lines Clean every line. Rinse every keg coupler with water.
Cellar Scrub from the top down: ceiling and walls, then the floor, with drains and sumps last. The day before a delivery is best, when the room is emptiest. Water does most of it; use a low-odour, food-safe cleaner only where water will not. Write the date and your name in the cellar log.
Coolers Check the water level in remote coolers and wet flash coolers, and top up to the mark if needed. Keep every cooler grill, including the heat dump, free of dust and fluff.
Glasswasher Give it a full strip-down: scrub the inside walls, spray arms, nozzles, filters and door seals. Rebuild it and run one empty cycle with a glass-restoring detergent.
Water softener Built-in type: check it and top up with salt made for water softeners, or sooner if the service light comes on. Separate softener: regenerate it every Monday and Friday, or as the maker instructs, and keep its salt topped up.
Glasses Check a sample is truly clean two or three times a week (see Glassware). Restore any that are not.
Bar Inside the fridges: shelves, panels, glass and air vents. The glass shelves and their plastic matting. The shelves for unchilled bottles. Rotate the back bar display bottles, and check bottles and cans are going out oldest first.

Every year, and as needed

Deliveries

The aim is simple: never run out, and never accept beer that is not right.

When ordering, have each keg arrive at least 2 full days before you need it on sale, and pick keg sizes you will finish within 5 days of going on.

Before the van arrives, walk the route the beer will take, from the kerb to its place in the cellar. Clear anything in the way, put the lights on, deal with wet or uneven patches, and check any ramp, hoist or drop mat is sound. That is your risk assessment. Have the cellar clean and tidy, and someone free to check the delivery in. The crew should handle the beer and your equipment safely; if they don't, say so.

As each keg or case comes off, check it:

Check Good If not
Condition Undamaged and not leaking Refuse it
Label Batch label with a best-before date Refuse it
Life left Kegs 20 days or more Note it on the delivery note and check with your manager before accepting it
Paperwork Matches your order and the delivery note, sizes included Note the difference on the delivery note
On the note at all Listed Refuse it
Empties going back Count is right Correct the note

Sign last. Write every shortage, damaged item or refused item on the delivery note first, and only sign when it is right. Once you sign, the stock is yours. Keep your copy, and check the beer has gone where you want it.

Rotate. Use stock oldest first, in best-before date order, and sell it before that date. Any simple system works as long as everyone follows it.

The cellar

Beer is a food and comes under food safety law. Treat the cellar like a kitchen store.

Temperature

Hold the cellar at 11 to 13°C and keep the door shut, apart from the daily 10 minutes of fresh air. Temperature controls how much gas the beer holds and how it tastes, and outside that range the flavour suffers.

Cellar What happens to keg beer
Below 11°C It takes up extra gas and fobs at the tap, or pours flat
Above 13°C It fobs

Choosing, fitting and servicing the cooler is a refrigeration engineer's job. It needs enough capacity to hold 11 to 13°C on the hottest days, and a thermostatic heater for the opposite problem, since a cellar at ground level can drop below 11°C in a hard frost. Your part is to leave it running, always, and keep air moving through it: dust the casing and grills on the cellar unit and on the unit outside.

Clean and fresh

Damp corners and dirty drains grow bacteria, mould and wild yeast, and strong smells drift straight into beer. Keep the room clean, dry and tidy at all times, not just on cleaning day, and the beer tastes the way the brewer intended, with fewer complaints and fewer pints sent back.

Nothing that smells belongs in a cellar: no bleach or strong disinfectant, no waste bin, no smoking, and no food at all apart from packaged drinks such as beer, wine and soft drinks (so no fresh food, fruit or vegetables). Nothing that stays wet: no standing water, and mops and buckets are stored elsewhere. No animals.

When you change a keg, let the FOB detector drip into a plastic jug, then tip it away and rinse the jug. Make sure every member of staff who changes kegs knows to do this.

Kit

Choose what fits your cellar and add anything else that helps you keep it clean.

For Kit
Checking Cellar thermometers (digital is easiest), a digital probe thermometer for beer in the glass, pH test strips or indicator for line cleaning, a 2 litre measuring jug, two plastic jugs
Floors and walls Broom, dustpan and brush, deck scrubber, hand scrubbing brush, food-grade plastic hose, a floor mop and bucket (kept outside the cellar)
Parts and equipment Food-grade stainless steel bucket, a good washing-up brush
Hygiene Cloths, paper towels, hand soap
Protection Sealed goggles of the ski-goggle type, heavy-duty gauntlet rubber gloves, a rubber or PVC apron, an eye wash bottle

Kegs and coolers

Changing a keg

Stage What to do
Before Turn off the gas to that keg at its secondary valve on the gas panel, and disconnect the coupler from the empty keg. Check the new keg is the right beer and in date, oldest first.
Swap Take the cap off the new keg and check the spear head and the coupler are clean, rinsing them with clean water if not. Fit the coupler and make sure it is fully engaged. Turn the gas back on and check the gas pump is working, if you have one.
After Reset the FOB detector so it fills with beer, catching any drips in the jug. Pull a sample at the bar and run the four checks.

Never tamper with a keg's spear or try to take it out. One-way kegs (such as PolyKeg or KeyKeg) need the right coupler, and must have their pressure released as the label explains before the empty goes out for recycling.

Coolers

A remote cooler in the cellar pumps chilled water through the python, the insulated bundle that carries the beer lines up to the bar. A flash cooler chills beer as it is poured. Remote coolers and wet flash coolers rely on a water bath: check the level weekly and top up to the mark if needed. Dry flash coolers have no water to check. Leave remote coolers on around the clock, check the ice bank daily, and keep every grill, including the heat dump, clear of dust and fluff. A clogged grill makes the cooler struggle.

Line cleaning

Every line, at least every 7 days, unless your installer has fitted a system built for longer and given you the interval in writing. Yeast and bacteria start building up inside a line within days, causing off flavours and fobbing.

Plan for it. Set aside at least 2 to 3½ hours, depending on how many lines you have. Never clean while customers are in, and never open with cleaner in the lines. Tell staff it is happening and put "Danger: line cleaning in progress" signs at the bar. Line cleaner is corrosive, so read the Safety section first.

Mix it right. Make a fresh batch every time, at the strength on the container, measured in a measuring jug and never a glass. Add the cleaner to the water, never water to the cleaner. Never reuse it, never guess the strength, and never mix it with another chemical.

Leave nothing wet. Do not leave water in the lines, cleaning bottles or buckets afterwards, and do not leave clean parts sitting in water. Store cleaning bottles upside down.

Measure each line once. On your first clean, catch what comes out of each tap in the measuring jug until it changes from beer to water (you will see the change clearly), and write the volume in the cellar log.

Step by step

Stage What to do
1. Prepare Goggles, gauntlet gloves and apron on before you handle any cleaner. Signs up. Dispense gas off. Spouts, sparklers and creamer plates off and cleaned separately. Couplers off the kegs, cleaned and fitted to the cleaning sockets. Cleaning bottle filled with clean, cold water (turn off its gas and release the pressure before you open it, every time). Gas pump on, if fitted.
2. Flush Clean, cold water through every line until the beer is out, FOB detectors included.
3. Clean Fresh cleaner in through the top of each FOB detector and drawn through to every tap.
4. Soak Leave for 10 minutes, then work the cleaner through each FOB detector and draw fresh solution through. Do this three times, 30 minutes in all, then go straight to the rinse.
5. Rinse Rinse the bottle, fill with clean, cold water and flush the cleaner out of the FOB detectors and lines. Then run 10 more litres through every line, and test the water from every tap with pH strips or the cleaner's colour indicator, against a strip dipped in fresh tap water. Keep flushing until no cleaner shows.
6. Back on Spouts, sparklers and creamer plates back on the right taps. Couplers onto the right kegs. Dispense gas on. FOB detectors reset and filled with beer.
7. Check Draw beer to the bar and run the four checks.

Glassware

Every glass that is drunk from goes back through the wash before it is used again. Every beer goes into a glass that is clean, cool, dry, free of grease and undamaged.

A glass still wet from the washer carries rinse aid, which flattens the head. A glass still hot from the machine makes the beer give up its gas and foam over. Grease, often from a tea towel, kills the head too.

Washing

First, empty out any drink, fruit and rubbish. The machine won't always shift lipstick, so deal with it now: fingers, a non-scratch pad or a wedge of lemon. Wash your hands after collecting dirty glasses.

Method How
Glasswasher Load the basket and run a full cycle. Only beer, cider, wine and soft drink glasses go in. A machine that is due a drain and clean gets one, busy night or not: dirty water just means a stack of dirty glasses.
Brush washer If your bar still has one, it needs more care than a glasswasher to stay clean. Push the glass onto the brushes two or three times, turning it yourself if the brushes do not spin, using the maker's recommended detergent and method. Rinse well under running water.
By hand Hand-hot water with a detergent made for glassware, never kitchen washing-up liquid. Rinse well under running water.

Then stand glasses upside down on rigid plastic matting to drain, cool and dry. Let them dry in the air: a cloth spreads bacteria and leaves fabric softener on the glass, which ruins the head. Never hurry a hot glass under the cold tap, as the sudden change can crack it or make it shatter. Put fresh-washed glasses at the back and serve from the front, so you always pick up a cool, dry one.

Brand new glasses get a wash with a glass-restoring detergent before first use. Follow the instructions on the container.

Is it really clean?

Two or three times a week, check some glasses by eye or with the water break test: wet the glass and watch. On a clean glass the water runs off in an even sheet. On a greasy one it breaks into patches and droplets.

The pour

The pour is the one step the customer watches. Teach it to everyone who serves, and watch them do it now and then.

A brand owner's own glass or pouring spec overrides all of this.

Lager from the tap

  1. Tilt the glass to 45°, held by its lower half, just under the tap but not touching it.
  2. Open the tap fully in one smooth go (a half-open tap makes foam) and aim the beer at the side of the glass.
  3. Straighten up steadily as it fills, never letting the spout dip into the foam.
  4. Stop at a 10 mm head.

Other keg beers, cans and bottles

Serve How
Cider, keg ale and stout Pour as for lager. Creamflow and nitro beers often pour in two stages: let the glass stand for about 2 minutes to settle, then top up. Use the head the brand owner specifies, which for many nitro stouts is deeper than 10 mm.
Cans and bottles Glass tilted and held low, away from where people drink. Pour down the side with the neck about 10 mm clear of the glass; for hygiene the can or bottle never touches the rim or the beer. From three-quarters full, straighten the glass as you finish.

Fault finder

What you see Ask
Too much foam (fobbing) Is the cellar between 11 and 13°C? Was the keg connected before it had rested and cooled? Was the tap opened fully? Is the remote cooler on, with its ice bank intact? Is the keg nearly empty? Is the coupler fully engaged? Are the lines due a clean? Are glasses still hot from the washer?
Flat pint, or a head that will not hold Is the cellar too cold? Is the gas off or the cylinder empty? Are glasses wet from the washer, or greasy from a cloth? Try the water break test.
Hazy beer Is it meant to be hazy (unfiltered)? If it should be clear: when were the lines last cleaned, and is it in date?
Off taste or smell When were the lines last cleaned? More than 7 days is too long: shine a pen torch along them, in the cellar and under the bar by the tap, to see any build-up. Take a spout off and look inside: yeast there means the taps are not being cleaned properly. Has the beer been on too long or gone past its best-before date (a keg connected more than 5 days)? Are smells from food, bins or bleach getting at anything that touches the beer? Is the temperature in range?
Too warm at the bar Work back from the glass. Are glasses straight from the washer? Are the remote coolers on, with the ice bank intact and grills clean? Is the cellar above 13°C?

Still not right? Take the beer off sale. For a Pillars beer, call us on 020 8521 5552 or email sales@pillarsbrewery.com. For an equipment fault, call your dispense or refrigeration engineer.

Cellar words

Word What it means
CATT Clarity, aroma, taste and temperature: the four checks
Coupler The head that clips onto a keg to let gas in and beer out
Dispense gas The carbon dioxide or mixed gas that pushes beer from keg to tap
FOB detector A float chamber on each beer line that stops foam and air reaching the tap when a keg runs out
Fobbing Beer pouring as too much foam
Gas pump A gas-driven pump that moves beer from the cellar to the bar
Heat dump The part of a cooler that gives off the heat it has taken out. Keep its grill clear.
Ice bank The ice that builds up in a remote cooler's water bath and does the chilling
Nucleated glass A glass etched on the inside base so it releases a steady stream of bubbles and keeps the head up
Python The insulated bundle that carries the beer lines and chilled water from cellar to bar
Secondary valves The on and off valves for each beer on the gas panel
Sparkler A nozzle with small holes, fitted to some tap spouts, that tightens the head
Spear The valve and tube built into the top of a keg